Model: AVEC 2412/VM3520+
Operating System: Windows 2000 (Note: might work with other versions of this os.)
File: ontr428.exe
Comments:
Relisys AVEC 2412/VM3520+ Driver. V 4.2 of NT drivers for RELI DS6 (VM3420), RELI DS15 (VM3440), RELI 2400 (VM3530), RELI 2412 VM3530+), RELI 4816 (VM4540), RELI 4830 (VM4542), RELI 9600 (VM6530), RELI 9612 (VM6530*), RELI 9624 VM6530+), RELI 9630 (VM6540), AVEC 2400 (VM3520), AVEC 2412(VM3520+), AVEC 4800 (VM4530), AVEC 4816 (VM4530+). Works under Windows 2000 with the 2412, although the SCSI adapter drivers for the included 16D32/16D3/16D1/3153 SCSI adapter may not work under Windows 2000. I'm using an Adaptic 2940. You'll also need the latest ASPI drivers from Adaptec.
File Contents: Run WINSETUP.EXE to install the drivers. Windows 2000 will attempt to find a driver with an INF file. There is none. Tell Windows to skip the driver installation. The scanner will work, but the OS will find a new device at every boot-up. I'm trying to get a work-around from Microsoft on this issue, but so far I've been unsuccessful.
Length Date Time Name
-------- ---- ---- ----
34304 08-22-97 00:00 WINSETUP.EXE
132252 08-22-97 00:00 TWE_32.DS_
132115 08-22-97 00:00 TWG_32.DS_
132196 08-22-97 00:00 TWF_32.DS_
132263 08-22-97 00:00 TWD_32.DS_
132537 08-22-97 00:00 TWS_32.DS_
132480 08-22-97 00:00 TWI_32.DS_
68418 08-22-97 00:00 DIAG2WIN.EX_
43814 09-15-95 10:56 TWAIN16.DL_
33907 09-15-95 10:56 TWAIN_32.DL_
33188 09-15-95 10:51 TWUNK_32.EX_
0 08-22-97 00:00 CARD/
18 07-25-97 00:00 CARD/DISK1
5 07-25-97 00:00 CARD/OEM_SCSI
94208 07-25-97 00:00 CARD/SETUP.EXE
42512 07-25-97 00:00 CARD/RESTART.EXE
2745 07-25-97 00:00 CARD/TXTSETUP.OEM
19019 07-25-97 00:00 CARD/OEMSETUP.INF
41956 07-25-97 00:00 CARD/16DSCSI.SYS
81264 08-22-97 00:00 CARD/WNDTC32.DLL
-------- -------
1289201 20 files